Nā Kiʻi Kūʻai kila ʻAmelika ASTM A992 I beam

Nā Kiʻi Kūʻai ʻAmelika Hui Pū ʻIa ASTM A992 I beam Featured Image

ʻO ka wehewehe pōkole:

ASTM I-Beamhe pauku kila me ke ku ponopūnaewele puni honuaa me ka paepaenā lehelehe. Hāʻawi ia i ka ratio kiʻekiʻe o ka ikaika-a-kaumaha, maikaʻi loa ka lawe ʻana i ka ukana, a me ka hana maʻalahi, i mea kūpono no nā hale, nā alahaka, a me nā papahana ʻoihana.

Kahi i kumu::Kina

inoa inoa::Pūʻulu kila aliʻi

Helu kumu hoʻohālike::RY-H2510

Mea maʻamau:ASTM

Papa:A36

Ana:W8×21 a i W24×104 (iniha)

Ka lōʻihi:Kūʻai no 6 m & 12 m, Ka lōʻihi i hana ʻia

Ka manawa hoʻouna:10-25 mau lā hana

Uku Uku:T/T, Hui Komohana

Palapala hōʻoia maikaʻi:EN 10204 3.1 palapala hōʻoia a me SGS/BV hōʻike hoʻāʻo ʻaoʻao ʻekolu (nā hoʻāʻo tensile a me ka piko)

E hoʻouna i ka leka uila iā mākou WhatsApp

Huahana Huahana

Hoʻolauna Huahana

Waiwai	Hōʻike / kikoʻī
Mea Kūlana	ASTM A36 (kūkulu nui)
Ka ikaika hua	≥250 MPa (36 ksi); Ka ikaika tensile ≥420 MPa
Anana	W8×21 a i W24×104 (iniha)
Ka lōʻihi	Kahua: 6 m & 12 m; Loaʻa nā lōʻihi maʻamau
Ka hoomanawanui ana	Kūlike me GB/T 11263 a i ʻole ASTM A6
Palapala Hoʻomaikaʻi	EN 10204 3.1; SGS/BV ʻaoʻao hoʻāʻo ʻekolu (tensile & bending)
Hoʻopau ʻili	ʻO ka galvanizing hot-dip, pena, a pēlā aku; hiki ke hoʻopilikino
Nā noi	Nā hale, nā alahaka, nā hale ʻoihana, ka moana a me ka halihali
Kaulike Kalapona (Ceq)	≤0.45% (hōʻoia i ka weldability maikaʻi); AWS D1.1 hoʻoheheʻe code kūpono
ʻAno ʻili	ʻAʻole ʻike ʻia nā māwae, nā ʻōpala, a me nā pelu; palahalaha ≤2 mm/m; ʻaoʻao perpendicularity ≤1°

Waiwai mīkini

Waiwai	Hōʻike	wehewehe
Ka ikaika hua	≥250 MPa (36 ksi)	Hoʻoikaika i kahi e hoʻomaka ai ka hoʻololi ʻana o ka plastic
Ikaika U'i	400–550 MPa (58–80 ksi)	ʻO ke koʻikoʻi kiʻekiʻe ma mua o ka haʻihaʻi ʻana ma lalo o ka ʻāʻī
ʻO ka lōʻihi	≥20%	ʻO ka hoʻololi ʻana o ka plastik ma luna o 200 mm ka lōʻihi
Paʻakiki (Brinell)	119–159 HB	Kuhikuhi paʻakikī mea
Kalapona (C)	≤0.26%	Pili i ka ikaika a me ka weldability
Manganese (Mn)	0.60–1.20%	Hoʻonui i ka ikaika a me ka paʻakikī
Sulfur (S)	≤0.05%	ʻO ka sulfur haʻahaʻa e hōʻoia i ka ʻoi aku ka paʻakikī
ʻOka (P)	≤0.04%	Hoʻonui ka phosphorus haʻahaʻa i ka paʻakikī
Silika (Si)	≤0.40%	Hoʻohui i ka ikaika a kōkua i ka deoxidation

Nui

Kinohi	Hohonu (i loko)	Laulā Flange (i)	Mānoanoa Pūnaewele (i)	Mānoanoa Flange (i)	Kaumaha (lb/ft)
W8×21 (Nā Nui Loa)	8.06	8.03	0.23	0.36	21
W8×24	8.06	8.03	0.26	0.44	24
W10×26	10.02	6.75	0.23	0.38	26
W10×30	10.05	6.75	0.28	0.44	30
W12×35	12	8	0.26	0.44	35
W12×40	12	8	0.3	0.5	40
W14×43	14.02	10.02	0.26	0.44	43
W14×48	14.02	10.03	0.3	0.5	48
W16×50	16	10.03	0.28	0.5	50
W16×57	16	10.03	0.3	0.56	57
W18×60	18	11.02	0.3	0.56	60
W18×64	18	11.03	0.32	0.62	64
W21×68	21	12	0.3	0.62	68
W21×76	21	12	0.34	0.69	76
W24×84	24	12	0.34	0.75	84
W24×104（Loaʻa nā nui）	24	12	0.4	0.88	104

Papa Hoʻohālikelike Nui a Hoʻomanawanui

ʻĀpana	Laulā maʻamau	ASTM A6/A6M hoʻomanawanui	Nā memo
Hohonu (H)	100–600 mm (4"–24")	±3 mm (±1/8")	Pono e noho i loko o ka nominal size tolerance
Laulā Flange (B)	100–250 mm (4"–10")	±3 mm (±1/8")	ʻO ka laulaha like ʻole e hōʻoia i ka paʻa ʻana o ka ukana
Mānoanoa Pūnaewele (tₙ)	4–13 mm	± 10% a i ʻole ±1 mm (kekahi ka nui)	Hoʻopilikia i ka hiki ke ʻā
Mānoanoa Flange (t_f)	6–20 mm	± 10% a i ʻole ±1 mm (kekahi ka nui)	He mea koʻikoʻi no ka ikaika kulou
Ka lōʻihi (L)	6–12 m maʻamau; maʻamau 15–18 m	+50 / 0 mm	ʻAʻole ʻae ʻia ka hoʻomanawanui hoʻemi
Pololei	—	1/1000 o ka loa	laʻa, ʻoi aku ka nui o 12 mm camber no 12 m beam
ʻAha Flange	—	≤4% o ka laula flange	E hōʻoia i ka wiliwili kūpono / alignment
wili	—	≤4 mm/m	He mea nui no nā kaola lōʻihi

Hoʻopau ʻili

ʻEleʻele Hot Rolled: Kūlana maʻamau

ʻO ka galvanizing wela: ≥85μm (kūpono me ASTM A123), hoʻāʻo paʻakai ≥500h

Ka uhi ʻana: Ua hoʻoheheʻe ʻia ka pena wai ma luna o ka ʻili o ke kaola kila me ka hoʻohana ʻana i ka pū pneumatic.

Maʻiʻo i hoʻopilikino ʻia

Māhele Hoʻoponopono	Nā koho	wehewehe	MOQ
Anana	Kiʻekiʻe (H), Laulā Flange (B), Uwelewele & Mānoanoa Flange (t_w, t_f), lōʻihi (L)	Nā nui maʻamau a i ʻole maʻamau; lawelawe ʻokiʻoki i ka lōʻihi	20 tona
Lapaʻau ʻili	Awili ʻia (ʻeleʻele), Sandblasting/Pā ʻana, ʻaila anti-rust, Pena pena/Epoxy, Hoʻohu wela.	Hoʻonui i ka pale ʻana i ka corrosion no nā kaiapuni like ʻole	20 tona
Kaʻina hana	Ka wili, Slotting, Bevel oki, Welding, End-face processing, Structural prefabrication	Hana i kēlā me kēia kiʻi; kūpono no nā papa, nā kaola, nā pili	20 tona
Hoailona & Packaging	Hoailona ma'amau, Huipu'i, Pa'i hope pale, 'Opi'i wai, ho'olālā ho'ouka ipu	E hōʻoia i ka mālama pono ʻana a me ka hoʻouna ʻana, kūpono no ka ukana kai	20 tona

Noi Nui

Nā hale kūkulu: Nā lāʻau a me nā kolamu no nā skyscrapers, nā hale hana, nā hale kūʻai, a me nā alahaka, e hāʻawi ana i ke kākoʻo lawe ukana mua.
Alahaka 'enekinia: Nā kaola nui a lua paha no nā alahaka kaʻa a me nā alahaka.
Nā Lako Kaumaha & Kākoʻo Hana Hana: Kākoʻo i nā mīkini nui a me nā kahua ʻoihana.
Hoʻoikaika Hoʻoikaika: Hoʻoikaika a hoʻololi paha i nā hale i loaʻa e hoʻomaikaʻi i ke kūpaʻa haʻahaʻa a me ke kūlou ʻana.

asm-a992-a572-h-beam-application-royal-steel-group-3

Hale Hana

Alahaka 'enekinia

asm-a992-a572-h-beam-application-royal-steel-group-4

Kākoʻo Lako Hana Hana

Ka hoʻoikaika kino

Pōmaikaʻi ʻo Royal Steel Group (No ke aha i kū ai ka Royal Group no nā mea kūʻai aku ma ʻAmelika?)

1) Keʻena Lālā - Kākoʻo ʻōlelo Paniolo, kōkua ʻae ʻae, a pēlā aku.

2) Ma luna o 5,000 tons o ke kumukūʻai, me nā ʻano nui like ʻole

3) Nānā ʻia e nā hui mana e like me CCIC, SGS, BV, a me TUV, me ka hoʻopaʻa ʻana i ke kai kūpono.

Hoʻopaʻa a hoʻouna

Hoʻopili

Palekana piha: ʻO nā kaola-I i wahī ʻia i ka tarpaulin me nā ʻeke desiccant 2-3; paʻa ka wela, ʻaʻole ka wai i ka wai.
Pūʻulu Paʻa: 12–16 mm mau kaula kila no ka puolo; palekana no 2-3 tons a kūpono me nā mea hoʻokiʻekiʻe US.
Hoʻomaʻamaʻa Lepili: Loaʻa i nā lepili Bīlingual (English/Spanish) ka māka, nā kikoʻī, ka helu HS, ka pūʻulu #, a me ka hōʻike hōʻike hōʻike.
Palena Pilikino Nui: ʻO I-beams ≥800 mm kiʻekiʻe i uhi ʻia me ka ʻaila alignment a uhi ʻia me ka tarpaulin.

Hāʻawi

Hoʻouna hilinaʻi: ʻO ka hui pū ʻana me nā mea lawe alakaʻi (MSK, MSC, COSCO, a me nā mea ʻē aʻe) e hoʻopaʻa pono i ka halihali.
Hōʻoia maikaʻi: Kaʻina hana kūpono ISO 9001; ʻO ka nānā pono ʻana mai ka ʻeke a hiki i ka lawe ʻana e hōʻoia i ka hōʻea ʻana o nā kaola i ke kūlana kūpono, e kākoʻo ana i ka hoʻokō ʻana o ka papahana.

ʻAmelika Hui Pū ʻIa ʻAmelika Hui Pū ʻIa: Hoʻouna mua ʻia ʻo ASTM I Beams i ʻAmelika ma o ka lawe ʻana i ke kai i hoʻopaʻa ʻia me ke kaula kila, ka pale hope, a me ka mālama anti-rust koho e hōʻoia i ka lawe palekana a maikaʻi.

FAQ

Nīnau: He aha nā kūlana i hui ai kāu mau I-beams no ʻAmelika Hui Pū ʻIa?
A:Hoʻokō kā mākou mau I-beamsASTM A36aA572 Papa 50, hoʻohana nui ʻia ma ʻAmelika Waena. Hiki iā mākou ke hoʻolako i nā huahana e kū ana i nā kūlana kūloko, e like meNOM o Mekiko.

Q: He aha ka manawa hoʻouna i Panama?
A:Lawe ʻia nā ukana kai mai Tianjin Port a i Colon Free Trade Zone28–32 lā. ʻO ka hāʻawi piha ʻana, me ka hana ʻana a me ka ʻae ʻana, ʻo ia45–60 lā. Loaʻa ka hoʻouna wikiwiki ʻana.

Nīnau: Ke kōkua nei ʻoe i ka hoʻomaʻemaʻe kuʻuna?
A:ʻAe, kā mākouʻoihana brokerse mālama i nā ʻōlelo hoʻolaha dute, ʻauhau, a me nā pepa e hōʻoia i ka hoʻouna maʻalahi.