ʻO nā beam S235JR /S355JR I he mau beam I kūkulu e kūlike ana me nā kūlana EN, me ka hiki ke hoʻopili maikaʻi ʻia a me ka hiki ke hāpai i ka ukana, a hoʻohana nui ʻia i nā hale kūkulu, nā alahaka, nā hale hana a me nā ʻenekinia kūkulu kila.
IPE 200 IPE 300 Structural Steel Beam S235JR S355JR European Standard Universal I Beam no ke kākoʻo kūkulu ʻana
| Waiwai | Nā kikoʻī / kikoʻī |
|---|---|
| Kūlana Mea Hana | EN 10025-2 (S235JR / S355JR kila kūkulu) |
| Ikaika Mekanika | S235JR: Hua ≥235 MPa; Uhi 360–510 MPa | S355JR: Hua ≥355 MPa; Uhi 470–630 MPa |
| Nā Nui o nā ʻĀpana | IPE80 a i IPE600 (loaʻa nā nui maʻamau) |
| Nā Koho Lōʻihi | Maʻamau 6 m & 12 m; loaʻa ka ʻokiʻoki ma muli o ka papahana |
| Mana Ana | Hana ʻia i EN 10034 / EN 10029 ʻae ʻia |
| Nānā a me ka Palapala Hōʻoia | EN 10204 3.1; koho hoʻāʻo SGS / BV |
| Ke ʻano o ka ʻili | ʻEleʻele, hoʻomākaukau mua ʻia, pena ʻia, a i ʻole galvanized wela |
| Nā Hoʻohana Maʻamau | Nā hale, nā alahaka, nā hale hana, nā hale kūʻai, nā mōlina mīkini, nā papahana ʻoihana |
| Ka like o ke kalapona (Ceq) | S235JR ≤0.42%; S355JR ≤0.47%, kūpono no ka hoʻopili ʻana i nā ʻano hana (nā kūlana EN & AWS) |
| Hoʻopau maikaʻi | ʻIli laumania, ʻaʻohe māwae a i ʻole nā laminations; pololei ≤2 mm/m |
| Waiwai | Nā kikoʻī S235JR | Nā kikoʻī S355JR | Wehewehena |
|---|---|---|---|
| Ikaika Hāʻawi | ≥235 MPa | ≥355 MPa | Pae ukana kahi e hoʻomaka ai ka deformation mau loa |
| Ikaika Hoʻopaʻa | 360–510 MPa | 470–630 MPa | ʻO ka ukana tensile kiʻekiʻe loa ma mua o ka haki ʻana |
| Hoʻolōʻihi | ≥26% | ≥22% | Ua ana ʻia ka ductility ma luna o ka lōʻihi o ke ana maʻamau |
| Paʻakikī (Brinell) | ~110–140 HB | ~140–180 HB | Pae paʻakikī hōʻike |
| Kalapona (C) | ≤0.17% | ≤0.24% | Kaulike no ka ikaika a me ka hiki ke hoʻopili ʻia |
| Manganese (Mn) | ≤1.40% | ≤1.60% | Hoʻomaikaʻi i ka ikaika a me ka paʻakikī haʻahaʻa haʻahaʻa |
| Sulfur (S) | ≤0.035% | ≤0.035% | Hoʻomalu ʻia e mālama i ka ductility |
| ʻO ka phosphorus (P) | ≤0.035% | ≤0.035% | Kaupalena ʻia e hoʻoikaika i ka paʻakikī a me ke kūpaʻa luhi |
| Silika (Si) | ≤0.40% | ≤0.55% | Hāʻawi i ka ikaika a me ka deoxidation |
| ʻAno | Hohonu (i loko) | Ka laulā o ka Flange (in) | Mānoanoa o ka Pūnaewele (i loko) | Mānoanoa o ka Flange (i loko) | Kaumaha (lb/ft) |
| W8×21（Nā Nui Loaʻa） | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104（Nā Nui i Loaʻa） | 24 | 12 | 0.4 | 0.88 | 104 |
| Palena | Pae Maʻamau | Ka Hoʻomanawanui ASTM A6/A6M | Nā memo |
|---|---|---|---|
| Ka hohonu (H) | 100–600 mm (4"–24") | ±3 mm (±1/8") | Pono e noho i loko o ka nui maʻamau |
| Ka laulā o ka Flange (B) | 100–250 mm (4"–10") | ±3 mm (±1/8") | Hōʻoia i ka paʻa o ka halihali |
| Mānoanoa o ka Pūnaewele (t_w) | 4–13 mm | ±10% a i ʻole ±1 mm | Hoʻopilikia i ka hiki ke ʻoki |
| Mānoanoa o ka Flange (t_f) | 6–20 mm | ±10% a i ʻole ±1 mm | He mea koʻikoʻi no ka ikaika kūlou |
| Ka lōʻihi (L) | 6–12 m maʻamau; maʻamau 15–18 m | +50 / 0 mm | ʻAʻole ʻae ʻia ka hoʻomanawanui minus |
| Pololei | — | 1/1000 o ka lōʻihi | e.g., ʻoi aku ka nui o 12 mm camber no ka beam 12 m |
| Ka huinahā o Flange | — | ≤4% o ka laulā o ka flange | Hoʻomaopopo i ka hoʻopili pono ʻana/hoʻonohonoho ʻana |
| Milo | — | ≤4 mm/m | He mea nui no nā kaola lōʻihi |
ʻEleʻele ʻōwili wela: Kūlana maʻamau
Hoʻoheheʻe wela: ≥85μm (kūlike me ASTM A123), hoʻāʻo pīpī paʻakai ≥500h
Uhi ʻana: Ua uhi ʻia ka ʻili o ke kaola kila me ka pena wai ma o ka pīpī pneumatic.
| Māhele Hoʻopilikino | Nā koho | Wehewehena | MOQ |
|---|---|---|---|
| Ana | Kiʻekiʻe (H), Laulā o ka Flange (B), Mānoanoa o ka Pūnaewele a me ka Flange (t_w, t_f), Lōʻihi (L) | Nā nui maʻamau a i ʻole nā nui maʻamau ʻole; loaʻa ka lawelawe ʻoki-i-ka-lōʻihi | 20 tone |
| Ka mālama ʻana i ka ʻili | ʻŌwili ʻia (ʻeleʻele), Hoʻoheheʻe one / hoʻoheheʻe pana, ʻaila anti-rust, pena / uhi epoxy, galvanizing hoʻoluʻu wela | Hoʻonui i ke kūpaʻa ʻana i ka corrosion no nā ʻano like ʻole | 20 tone |
| Ka hana ʻana | ʻEli ʻana, Slotting, ʻoki ʻana i ka Bevel, kuʻihao, hana ʻana i ka hopena o ke alo, hana mua ʻana o ke kūkulu ʻana | Hana ʻia e like me nā kiʻi; kūpono no nā mōlina, nā kaola, a me nā pilina | 20 tone |
| Ka Hōʻailona a me ka Hoʻopili ʻana | Māka maʻamau, Hoʻopili ʻana, Nā papa hopena pale, ʻUhi wai ʻole, Hoʻolālā hoʻouka pahu | Hoʻomaopopo i ka lawelawe palekana a me ka hoʻouna ʻana, kūpono no ka ukana kai | 20 tone |
Ke Kūkulu Hale ʻanaHoʻohana ʻia ma ke ʻano he mau kaola carline a me nā kolamu i nā hale kiʻekiʻe, nā hale hana, nā hale kūʻai, nā alahaka e hāpai i nā ukana o nā hale.
ʻEnekinia AlahakaHoʻohana ʻia ma ke ʻano he mau lālā mua a me nā lālā lua o nā alahaka alanui a me nā alahaka no ka poʻe hele wāwae.
Kākoʻo ʻOihana a me nā Lako HanaKākoʻo ikaika no nā lako kaumaha, nā mīkini, a me nā mōlina a me nā kahua ʻoihana.
Hoʻoikaika KūkuluNo ka hoʻoikaika ʻana i ka ukana a me ka hoʻoikaika ʻana i ke kūlou ʻana o nā hale i kū nei.
ʻAno Hale
ʻEnekinia Alahaka
Kākoʻo Lako Hana ʻOihana
Hoʻoikaika Kūkulu
1) Keʻena Lālā - kākoʻo ʻōlelo Paniolo, kōkua hoʻomaʻemaʻe dute, a pēlā aku.
2) Ma luna o 5,000 tons o ka waihona i loko o ka waihona, me nā ʻano nui like ʻole
3) Nānā ʻia e nā hui mana e like me CCIC, SGS, BV, a me TUV, me ka hoʻopili ʻana i ke kai maʻamau
Hoʻopili ʻana:
Ua kāʻei ʻia nā puʻupuʻu me nā kaula kila, me ka pepa lāʻau ma waena o nā papa e pale aku ai i ka neʻe ʻana a me ka hōʻino ʻana o ka ʻili.
Ua wahī ʻia me ka pepa pale wai ʻole a i ʻole ka ʻili plastik e pale ai i ka makū a me ka popo.
Hoʻomaopopo maikaʻi ʻia me ke ʻano, ka nui, ka helu wela a me nā kikoʻī nānā.
Hoʻouna ʻia:
Ma ke Kai: Hoʻouna ʻia ʻo B/L o ka ipu a i ʻole ka haki-nui e like me ka nui o ke kaola a me ke awa o kahi e hele ai.
Hoʻonohonoho ʻia ka hoʻouna ʻana e hāʻawi i ka lawelawe palekana, ka ukana kūpono, a me ka hoʻouna manawa kūpono.
ʻO ka hoʻonā halihali ʻo ʻEulopa a me ka mākeke honua:Hoʻouna nui ʻia nā S235JR /S355JR I Beam e nā ipu a i ʻole i loko o ka moku nui ma ke kai, i uhi ʻia me ke kaula kila, ka pale hopena a me ka mālama anti-rust koho e hōʻoia i ka palekana, paʻa a me ka pono o nā lawe ʻana i ʻEulopa, ka Hikina Waena, ʻApelika a me nā mākeke honua ʻē aʻe.
Q: He aha nā S235JR a me S355JR?
A: ʻO kēia nā papa o ke kila kūkulu e like me EN 10025-2. He kila kūkulu maʻamau ʻo S235JR me ka hiki ke hoʻopili maikaʻi ʻia, ʻo S355JR kahi kila ikaika kiʻekiʻe no nā ukana kaumaha.
Q: He aha nā ʻano o nā kaola I i loaʻa?
A: ʻO kekahi mau moʻo kaulana ʻo IPE, HEA, HEB a me HEM. Loaʻa pū nā nui i hoʻopilikino ʻia.
Q: Pehea ka lōʻihi e hiki ai iā ʻoe ke hoʻolako?
A: ʻO nā lōʻihi maʻamau he 6 m a me 12 m. Loaʻa ka lawelawe ʻokiʻoki ma ke noi ʻana.
Q: He aha nā ʻano hana ʻili i loaʻa?
A: ʻEleʻele (ʻōwili wela), oneblast, uhi mua, pena, uhi epoxy, uhi waiwai zinc, a me ka galvanize hoʻoluʻu wela.
Q: Hiki iaʻu ke hoʻoheheʻe a ʻokiʻoki i nā kaola?
A: ʻAe. Loaʻa iā S235JR a me S355JR nā pae kalapona i kāohi paʻa ʻia e kūpono ai no ka hoʻoheheʻe ʻana, ka ʻeli ʻana, a me ka ʻoki ʻana.
Wahi noho
Bl20, Shanhecheng, alanui Shuangjie, Apana Beichen, Tianjin, Kina
Leka uila
Kelepona
+86 13652091506
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou
