Nā ʻIkepili Kūkulu Kila ʻAmelika ASTM A572 I beam
Nā ʻUmi I kila ASTM A572 Papa 50 - Nā Kikoʻī ʻenehana
| Waiwai | Nā kikoʻī / kikoʻī |
|---|---|
| Kūlana Mea Hana | ASTM A572 Papa 50 (Kila Kūkulu Haʻahaʻa Ikaika Kiʻekiʻe) |
| Ikaika Hāʻawi | ≥345 MPa (50 ksi); Ikaika Uila ≥450–620 MPa |
| Nā Ana | W8×18 a i W36×300 (ʻīniha, nā kaola I-ʻano W) |
| Ka lōʻihi | Waihona: 6 m & 12 m; loaʻa ka ʻoki maʻamau i ka lōʻihi |
| Ka Hoʻomanawanui Ana | Kūlike me ASTM A6 / A6M |
| Palapala Hōʻoia Kūlana | EN 10204 3.1; Hoʻāʻo ʻaoʻao ʻekolu SGS / BV (kemika, tensile, hopena) |
| Hoʻopau ʻili | ʻEleʻele, pena ʻia ka primer, galvanized wela; hiki ke hoʻopilikino ʻia |
| Nā noi | Nā hale kiʻekiʻe, nā alahaka, nā hale hana ʻoihana, nā hale kaumaha, nā papahana halihali |
| Ka like o ke kalapona (Ceq) | ≤0.47% (maikaʻi loa ka hiki ke hoʻopili ʻia); kūlike ʻo AWS D1.1 |
| Ka maikaʻi o ka ʻili | ʻAʻohe māwae, ʻūhā, a i ʻole nā laminations; pololei ≤2 mm/m; flange/web squareness ≤1° |
ASTM A572 Papa 50 - Nā Waiwai Mekanika a me ka Hoʻohui Kemika
| Waiwai | Nā kikoʻī | Wehewehena |
|---|---|---|
| Ikaika Hāʻawi | ≥345 MPa (50 ksi) | ʻO ke kaumaha kahi e hoʻomaka ai ka mea i ka deformation plastic |
| Ikaika Hoʻopaʻa | 450–620 MPa (65–90 ksi) | ʻO ke kaumaha kiʻekiʻe ma mua o ka haki ʻana ma lalo o ke kaumaha |
| Hoʻolōʻihi | ≥18% | ʻO ka hoʻololi ʻana o ka palaki ma luna o 200 mm ka lōʻihi o ke ana |
| Paʻakikī (Brinell) | 135–180 HB | Ka waiwai kuhikuhi no ka paʻakikī o ka mea |
| Kalapona (C) | ≤0.23% | Hoʻokele i ka pae ikaika a me ka hiki ke hoʻopili ʻia |
| Manganese (Mn) | 0.50–1.60% | Hoʻonui i ka ikaika, ka paʻakikī, a me ke ʻano |
| Sulfur (S) | ≤0.05% | Hoʻomaikaʻi ka sulfur haʻahaʻa i ka ductility a me ka paʻakikī |
| ʻO ka phosphorus (P) | ≤0.04% | Ua kaupalena ʻia e hoʻomaikaʻi i ka paʻakikī a me ka hana luhi |
| Silika (Si) | ≤0.40% | Hoʻoikaika i ke kila a hoʻomaikaʻi i ka deoxidation i ka wā o ka hana kila |
| ʻAno | Hohonu (i loko) | Ka laulā o ka Flange (in) | Mānoanoa o ka Pūnaewele (i loko) | Mānoanoa o ka Flange (i loko) | Kaumaha (lb/ft) |
| W8×21（Nā Nui Loaʻa） | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104（Nā Nui i Loaʻa） | 24 | 12 | 0.4 | 0.88 | 104 |
| Palena | Pae Maʻamau | Ka Hoʻomanawanui ASTM A6/A6M | Nā memo |
|---|---|---|---|
| Ka hohonu (H) | 100–600 mm (4"–24") | ±3 mm (±1/8") | Pono e noho i loko o ka nui maʻamau |
| Ka laulā o ka Flange (B) | 100–250 mm (4"–10") | ±3 mm (±1/8") | Hōʻoia i ka paʻa o ka halihali |
| Mānoanoa o ka Pūnaewele (t_w) | 4–13 mm | ±10% a i ʻole ±1 mm | Hoʻopilikia i ka hiki ke ʻoki |
| Mānoanoa o ka Flange (t_f) | 6–20 mm | ±10% a i ʻole ±1 mm | He mea koʻikoʻi no ka ikaika kūlou |
| Ka lōʻihi (L) | 6–12 m maʻamau; maʻamau 15–18 m | +50 / 0 mm | ʻAʻole ʻae ʻia ka hoʻomanawanui minus |
| Pololei | — | 1/1000 o ka lōʻihi | e.g., ʻoi aku ka nui o 12 mm camber no ka beam 12 m |
| Ka huinahā o Flange | — | ≤4% o ka laulā o ka flange | Hoʻomaopopo i ka hoʻopili pono ʻana/hoʻonohonoho ʻana |
| Milo | — | ≤4 mm/m | He mea nui no nā kaola lōʻihi |
ʻEleʻele ʻōwili wela: Kūlana maʻamau
Hoʻoheheʻe wela: ≥85μm (kūlike me ASTM A123), hoʻāʻo pīpī paʻakai ≥500h
Uhi ʻana: Ua pīpī like ʻia ka pena wai ma luna o ka ʻili o ke kaola kila me ka hoʻohana ʻana i ka pū pīpī pneumatic.
| Māhele Hoʻopilikino | Nā koho | Wehewehena | MOQ |
|---|---|---|---|
| Ana | Kiʻekiʻe (H), Laulā o ka Flange (B), Mānoanoa o ka Pūnaewele a me ka Flange (t_w, t_f), Lōʻihi (L) | Nā nui maʻamau a i ʻole nā nui maʻamau ʻole; loaʻa ka lawelawe ʻoki-i-ka-lōʻihi | 20 tone |
| Ka mālama ʻana i ka ʻili | ʻŌwili ʻia (ʻeleʻele), Sandblasting/Shot blasting, ʻAila anti-rust, Pena/Epoxy coating, Welt-dip galvanizing | Hoʻomaikaʻi i ke kūpaʻa ʻana i ka pala no nā ʻano kaiapuni like ʻole | 20 tone |
| Ka hana ʻana | ʻEli ʻana, Slotting, ʻoki ʻana i ka Bevel, kuʻihao, hana ʻana i ka hopena o ke alo, hana mua ʻana o ke kūkulu ʻana | Hana ʻia e like me nā kiʻi; kūpono no nā mōlina, nā kaola, a me nā pilina | 20 tone |
| Ka Hōʻailona a me ka Hoʻopili ʻana | Māka maʻamau, Hoʻopili ʻana, Nā papa hopena pale, ʻUhi wai ʻole, Hoʻolālā hoʻouka pahu | Hoʻomaopopo i ka lawelawe palekana a me ka hoʻouna ʻana, kūpono no ka ukana kai | 20 tone |
Nā Hale HanaNā kaola a me nā kolamu no nā hale kiaʻi kiʻekiʻe, nā hale hana, nā hale kūʻai, a me nā alahaka e lawelawe ana ma ke ʻano he mau mea amo ukana nui.
ʻEnekinia AlahakaNā kaola mua a lua paha no nā alahaka kaʻa a me nā alahaka hele wāwae.
Nā Lako Kaumaha a me ke Kākoʻo ʻOihana: Kākoʻo i nā lako kaumaha a me nā kahua ʻoihana.
Hoʻoikaika Kūkulu: Ke hoʻoikaika ʻana a i ʻole ke hoʻololi ʻana i kahi hale e kū nei e kūʻē i nā ukana kiʻekiʻe aʻe a i ʻole e kūʻē i ke kūlou ʻana.
ʻAno Hale
ʻEnekinia Alahaka
Kākoʻo Lako Hana ʻOihana
Hoʻoikaika Kūkulu
1) Keʻena Lālā - kākoʻo ʻōlelo Paniolo, kōkua hoʻomaʻemaʻe dute, a pēlā aku.
2) Ma luna o 5,000 tons o ka waihona i loko o ka waihona, me nā ʻano nui like ʻole
3) Nānā ʻia e nā hui mana e like me CCIC, SGS, BV, a me TUV, me ka hoʻopili ʻana i ke kai maʻamau
Hoʻopili ʻana
Hoʻomalu Piha: Ua wahī ʻia nā I-beams me ka tarpaulin me 2-3 mau ʻeke desiccant; pale nā papa tarpaulin e hoʻopaʻa ana i ka wela a pale i ka ua mai ke komo ʻana o ka makū.
Hoʻopili Paʻa: Ua wahī ʻia kēlā me kēia pūʻolo me nā kaula kila 12–16 mm; maʻalahi no 2–3 tons a me nā lako hāpai kūpono me ʻAmelika.
Ka Lepili Moakaka: Nā lepili ʻelua ʻōlelo (Pelekania a me Paniolo) me ka māka, nā kikoʻī, ke code HS, ka helu puʻukū a me kahi kuhikuhi i ka hōʻike hoʻāʻo.
Ka palekana ʻikepili kiʻekiʻe: Ua mālama ʻia nā kaola I-≥800 mm me kahi ʻaila hoʻonohonoho a laila ua wahī ʻia me ka tarpaulin i ʻelua manawa.
Hoʻouna ʻana
Hoʻouna Hilinaʻi: Hana pū no nā mea lawe maikaʻi loa (MSK, MSC, COSCO ect) e hōʻoia i ka hoʻouna palekana.
Mana Kūlana: ʻŌnaehana ISO 9001; Hoʻomalu paʻa ʻia nā kaola mai ka hoʻopili ʻana a hiki i ka lawe ʻana e hōʻoia i ko lākou hōʻea piha ʻana, e ʻae iā ʻoe e loaʻa kahi papahana me ka pilikia ʻole.
Q: He aha nā kūlana no kāu mau I-beams ma ʻAmelika Waena?
A: Kūlike kā mākou I Beams me ka ASTM A36 & A572 Grade 50 i kūpono no ʻAmelika Waena. Hiki nō hoʻi ke hoʻolako i nā huahana e kū ana i nā kūlana aupuni (e laʻa, MEXICO NOM).
Q: Pehea ka lōʻihi o ka lawe ʻana i Panama?
A: Ka Manawa Hoʻoili Ukana Kai mai ke Awa ʻo Tianjin a i ka ʻĀpana Kālepa Kūʻokoʻa o Colon 28-32 mau lā pule. ʻO ka hana ʻana a me ka lawe ʻana he 45-60 mau lā. Hiki ke hoʻonohonoho ʻia ka lawe wikiwiki ʻana.
Q: Ke kōkua nei ʻoe me ka hoʻokuʻu ʻana o nā dute?
A: ʻAe, e hana kā mākou mau mea kūʻai loea i ka hoʻolaha dute, e uku i ka ʻauhau a me nā hana pepa āpau e hōʻoia i ka lawe ʻana me ka maʻalahi.
Wahi noho
Bl20, Shanhecheng, alanui Shuangjie, Apana Beichen, Tianjin, Kina
Leka uila
Kelepona
+86 13652091506
