ʻO nā kaola EN I he mau ʻāpana kila kūkulu ʻEulopa maʻamau me ka halihali ukana paʻa, ke kūpaʻa maikaʻi i ke kūlou ʻana a he kuʻuna lōʻihi o ka hoʻohana ʻana i ka hoʻolālā ʻana i nā hale a me nā ʻōnaehana ʻenekinia.
Nā ʻIkepili Kūkulu Kila ʻEulopa EN S275JR I kaola
| Waiwai | Nā kikoʻī / kikoʻī |
|---|---|
| Kūlana Mea Hana | EN S275JR (kila kūkulu ikaika i hoʻomaikaʻi ʻia) |
| Ikaika Hāʻawi | ≥275 MPa; Ikaika Uila 410–560 MPa |
| Nā Ana | IPE 80–IPE 600 / IPN 80–IPN 550 (e like me EN 10365) |
| Ka lōʻihi | Kūlana maʻamau: 6 m / 12 m; Loaʻa nā lōʻihi maʻamau a hiki i 24 m |
| Ka Hoʻomanawanui Ana | Kūlike me EN 10034 no nā ʻāpana kūkulu I i ʻōwili wela ʻia |
| Palapala Hōʻoia Kūlana | EN 10204 3.1 / 3.2; Koho ka nānā ʻana o SGS, BV, TUV mai nā ʻaoʻao ʻekolu |
| Hoʻopau ʻili | Ke kila ʻeleʻele, galvanizing wela-luʻu, pena epoxy, pahū one SA2.5 |
| Nā noi | Nā hale ākea nui, nā kaola amo ukana, nā hale ʻoihana, nā alahaka, ka hana ʻana i nā mīkini kaumaha |
| Ka like o ke kalapona (Ceq) | ≤0.47% (maikaʻi ka weldability no nā ʻano hana kuʻihao EN & AWS maʻamau) |
| Ka maikaʻi o ka ʻili | Laumania, ʻaʻohe māwae a me nā laminations; ke ahonui pololei ≤2 mm/m |
| Waiwai | Nā kikoʻī | Wehewehena |
|---|---|---|
| Ikaika Hāʻawi | ≥275 MPa | ʻO ke kaumaha kahi e hoʻomaka ai ke kila i ka deformation mau loa |
| Ikaika Hoʻopaʻa | 410–560 MPa | ʻO ka ukana tensile kiʻekiʻe loa e hiki ai i ke kila ke kū ma mua o ka haki ʻana |
| Hoʻolōʻihi | ≥20% | ʻO ka hoʻololi ʻana o ka palaki i ana ʻia ma luna o ka lōʻihi o ke ana maʻamau |
| Paʻakikī (Brinell) | 120–160 HB | ʻO ka pae paʻakikī maʻamau no ke kila kūkulu S275JR |
| Kalapona (C) | ≤0.20% | Hōʻoia i ka maikaʻi o ka weldability a me ka paʻa |
| Manganese (Mn) | 0.60–1.50% | Hoʻonui i ka ikaika a me ke kūpaʻa i ka hopena |
| Sulfur (S) | ≤0.035% | Hoʻomaikaʻi ka sulfur haʻahaʻa i ka ductility a hōʻemi i ka brittleness |
| ʻO ka phosphorus (P) | ≤0.035% | Hoʻomaikaʻi ka phosphorus haʻahaʻa i ka paʻakikī a me ka maikaʻi o ka weld |
| Silika (Si) | ≤0.50% | Hoʻoikaika i ka mea a kōkua i ka deoxidation i ka wā o ka hana kila |
| ʻAno | Hohonu (i loko) | Ka laulā o ka Flange (in) | Mānoanoa o ka Pūnaewele (i loko) | Mānoanoa o ka Flange (i loko) | Kaumaha (lb/ft) |
| W8×21（Nā Nui Loaʻa） | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104（Nā Nui i Loaʻa） | 24 | 12 | 0.4 | 0.88 | 104 |
| Palena | Pae Maʻamau | Ka Hoʻomanawanui EN 10034 / ASTM A6 | Nā memo |
|---|---|---|---|
| Ka hohonu (H) | 100–600 mm (4"–24") | ±3 mm (±1/8") | Pono e noho i loko o ka nui maʻamau no ke kūpaʻa o ke kūkulu ʻana |
| Ka laulā o ka Flange (B) | 100–250 mm (4"–10") | ±3 mm (±1/8") | Hoʻomaopopo i ka halihali paʻa a me ka wili kūpono |
| Mānoanoa o ka Pūnaewele (t_w) | 5–14 mm | ±10% a i ʻole ±1 mm | Hoʻopilikia i ka shear a me ka mana kūkulu holoʻokoʻa |
| Mānoanoa o ka Flange (t_f) | 6–22 mm | ±10% a i ʻole ±1 mm | He mea nui no ka ikaika a me ke kūpaʻa o ke kūlou ʻana |
| Ka lōʻihi (L) | 6–12 m maʻamau; maʻamau 15–18 m | +50 / 0 mm | ʻAʻole ʻae ʻia ka hoʻomanawanui maikaʻi ʻole |
| Pololei | — | 1/1000 o ka lōʻihi | e.g., ʻoi aku ka nui o 12 mm camber no ka beam 12 m |
| Ka huinahā o Flange | — | ≤4% o ka laulā o ka flange | Hoʻomaopopo i ke kaulike kūpono a me ke kūpono |
| Milo | — | ≤4 mm/m | He mea nui no nā noi kukuna lōʻihi |
ʻEleʻele ʻōwili wela: Kūlana maʻamau
Hoʻoheheʻe wela: ≥85μm (kūlike me ASTM A123), hoʻāʻo pīpī paʻakai ≥500h
Uhi ʻana: Ua pīpī like ʻia ka pena wai ma luna o ka ʻili o ke kaola kila me ka hoʻohana ʻana i ka pū pīpī pneumatic.
| Māhele Hoʻopilikino | Nā koho | Wehewehena | MOQ |
|---|---|---|---|
| Ana | Kiʻekiʻe (H), Laulā o ka Flange (B), Mānoanoa o ka Pūnaewele a me ka Flange (t_w, t_f), Lōʻihi (L) | Nā nui IPE/IPN maʻamau a i ʻole maʻamau ʻole; loaʻa ka lawelawe ʻoki-a-lōʻihi | 20 tone |
| Ka mālama ʻana i ka ʻili | ʻŌwili ʻia (ʻeleʻele), Sandblasting/Shot blasting, ʻAila anti-rust, Pena/Epoxy coating, Welt-dip galvanizing | Hoʻonui i ke kūpaʻa ʻana i ka pala no nā ʻano kaiapuni like ʻole, me nā wahi kahakai a ʻoihana paha | 20 tone |
| Ka hana ʻana | ʻEli ʻana, Slotting, ʻoki ʻana i ka Bevel, kuʻihao, hana ʻana i ka hopena o ke alo, hana mua ʻana o ke kūkulu ʻana | Hana ʻia e like me nā kiʻi; kūpono no nā kaola, nā kolamu, nā kiʻikuhi, a me nā pilina | 20 tone |
| Ka Hōʻailona a me ka Hoʻopili ʻana | Māka maʻamau, Hoʻopili ʻana, Nā papa hopena pale, ʻUhi wai ʻole, Hoʻolālā hoʻouka pahu | Hoʻomaopopo i ka lawelawe palekana a me ka hoʻouna ʻana, i hoʻonohonoho pono ʻia no ka ukana kai a me ka halihali mamao loa | 20 tone |
Nā Hale Hana: nā kaola a me nā kolamu no nā hale kiʻekiʻe, nā hale hana, nā hale liʻiliʻi, a me nā alahaka e lawelawe ana ma ke ʻano he mau lālā amo ukana nui.
ʻEnekinia AlahakaNā kaola kākoʻo mua a lua paha no nā alahaka kaʻa a me nā alahaka hele wāwae.
Nā Lako Kaumaha a me ke Kākoʻo ʻOihana: Kākoʻo i nā lako kaumaha a me nā kahua ʻoihana.
Hoʻoikaika Kūkulu:Ka hoʻonui ʻana a i ʻole ka hoʻololi ʻana i kahi hale a i ʻole ke ʻano hana i hiki ai ke kākoʻo i nā ukana a i ʻole nā moment hou aʻe.
ʻAno Hale
ʻEnekinia Alahaka
Kākoʻo Lako Hana ʻOihana
Hoʻoikaika Kūkulu
1) Keʻena Lālā - kākoʻo ʻōlelo Paniolo, kōkua hoʻomaʻemaʻe dute, a pēlā aku.
2) Ma luna o 5,000 tons o ka waihona i loko o ka waihona, me nā ʻano nui like ʻole
3) Nānā ʻia e nā hui mana e like me CCIC, SGS, BV, a me TUV, me ka hoʻopili ʻana i ke kai maʻamau
Hoʻopili ʻana
Palekana pihaUa hoʻopaʻa ʻia ka tarpaulin a me 2-3 mau ʻāpana desiccant no nā I-beams; ʻO nā pepa tarpaulin pale wela a pale wai hoʻi e pale aku i ka ua mai ke komo ʻana i loko o nā I-beams.
Pūʻulu palekanaNo kēlā me kēia pūʻolo ua wahī ʻia me ke kaula kila 12 - 16 mm; maikaʻi no 2-3 tons a loaʻa iā ia nā lako hāpai kūpono.
Ka lepili maopopoNā lepili ʻōlelo ʻelua (Pelekania a me Paniolo) me ka māka, nā kikoʻī a me ke code HS, ka helu puʻukū a me kahi kuhikuhi i ka hoʻāʻo.
Palekana Profile Kiʻekiʻe: Nā kaola I ≥800 mm me kahi papa o ka ʻaila hoʻonohonoho a me ka tarpaulin pālua.
Hoʻouna ʻana
Hoʻouna hilinaʻi:ʻO ka hana like ʻana o nā mea lawe ukana maikaʻi loa (MSK, MSC, COSCO ect) no ka holo palekana.
Ka Mana KūlanaPaʻa ka lepo o nā kaola a hiki iā ʻoe ke hilinaʻi e hōʻea piha ana lākou i laila ʻo ia hoʻi hiki iā ʻoe ke hilinaʻi i kahi papahana me ka pilikia ʻole.
Q: He aha nā kūlana i hoʻokō ʻia e kāu mau kukuna I ma ʻAmelika Waena?
A: kūlike kā mākou mau kukuna i me ASTM A36 & A572 Grade 50 i ʻae ʻia ma ʻAmelika Waena. Hiki iā mākou ke hāʻawi i ke kūlana aupuni (e like me MEXICO NOM) a i ʻole nā mea like me kēia mau huahana kūlana.
Q: Pehea ka lōʻihi o ka lawe ʻana i Panama?
A: Ka Manawa Hoʻoili Ukana Kai mai ke Awa ʻo Tianjin a i ka ʻĀpana Kālepa Kūʻokoʻa o Colon 28-32 mau lā pule. 45~60 mau lā no ka hana ʻana a me ka lawe ʻana. Loaʻa nō hoʻi ka lawe wikiwiki.
Q: Loaʻa iā ʻoe ka ʻae ʻana o ke dute?
A: ʻAe, e hana kā mākou mau mea kūʻai loea i ka hoʻolaha dute, ka uku ʻauhau a me nā pepa āpau a e maʻalahi ka lawe ʻana.
Wahi noho
Bl20, Shanhecheng, alanui Shuangjie, Apana Beichen, Tianjin, Kina
Leka uila
Kelepona
+86 13652091506
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou
